Specs
Narrow Web Path specs
Setup notes and briefing numbers for Narrow Web Path.
Narrow web press path tolerances
This Narrow Web Path specs page outlines the technical details for narrow web flexo applications. It is built for teams checking fit, setup and production requirements before placing an order.
Narrow web work starts with web width, repeat length and the exact stock to be printed. Adhesive labels, wraparound film and tag material each need different tension ranges, plate mounting choices and drying settings under South African plant conditions. Inland dust can affect sensor readings, while coastal moisture changes how paper and film track through the press path.
Confirm the machine-side details before plates, inks or consumables are booked out. Operators usually check unwind direction, guide position, nip pressure and die station alignment so the first setup is based on measured values rather than memory. A printed copy near the press helps when shifts change during a long label run.
Checks before plates are ordered
Record the press model, number of colours, available UV or hot air drying and the narrowest web the line handles consistently. Include anilox counts, plate thickness and tape combination if the job has fine reverse text, solids or barcode areas. Those points affect impression settings and whether the path suits paper, PP, PE or laminated stock.
Use this Narrow Web Path specs page with the matching path record and any ink notes for the same SKU. Before sending a request through the contact form, note the web width, substrate type, print repeat and any issue seen at the unwind, print deck or rewind. A sketch of the threading route and die position shows the setup clearly.
- Web width and repeat confirmed
- Tension, guide and rewind checked
- Press model and stock listed
SA running conditions to note
Plants around Johannesburg often deal with dry airborne dust, which can build up on guides, photo-eyes and static bars during label production. Durban and Cape Town sites may need closer watch on humidity, especially where film rolls move from storage into a cooler press area. These factors belong in the specs because they influence tracking, drying and restart stability.
Power interruptions matter when UV units, chill rollers or web inspection systems need a controlled restart. Older narrow web lines in established industrial areas may also have non-standard guard layouts, replacement sensors or retrofitted stations that should be listed before new tooling is prepared. That information reduces mismatches between the ordered setup and the actual machine path.
Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.
Job data for accurate setup
Send the item code, quantity, substrate gauge and the fault that needs attention, whether it is wander, ink laydown or die strike. Add photos that show the unwind stand, one print unit and the rewind if the problem develops later in the path. Exact information makes the specs more useful for both prepress and press crews.
Keep one record per job version so repeat work can be traced against the same plate set, stock and machine settings. When a buyer or production planner needs support, the record should match the internal job sheet and any sample notes taken during the run.
What our Flexo Printing customers say
Verified Google reviews